Leveling The Washer - Labconco 44000 Series User Manual

Chapter 3: Getting Started
F
F
Position the level
in both directions
to ensure the
washer is level
front-to-back and
side-to-side.
18
Chapter 2: Prerequisites

Leveling the Washer

If you have the Freestanding model of the SteamScrubber
or FlaskScrubber 5lassware Washer, after you have
installed the leveling feet, you must level the washer by
adjusting the leveling feet.
To level the washer:
1. Position the washer in its final installation site.
2. Place a carpenter level on the washer in the positions
shown in Figure 3-3.
3. Turn the four leveling feet, as needed, to level the
washer. A leveling foot is illustrated in Figure 3-4.
Figure 3-3
P#o%&ct Se#+ice -./00.122.341/