The Steamscrubber Racks; Lowering The Top Washer Arm And Top Rack - Labconco 44000 Series User Manual

Chapter 2: Prerequisites
Chapter 4: Using Your Washer
best suit your needs. For a complete list of available rack
accessories, refer to Appendix D: Glassware Washer
Accessories.
If you purchased a SteamScrubber, proceed to the
following section, The SteamScrubber Racks. If you
purchased a FlaskScrubber, proceed to the section, The
FlaskScrubber Racks, later in this chapter.

The SteamScrubber Racks

The SteamScrubber is equipped with two racks Pa top rack
and a bottom rackQ. The top rack of the SteamScrubber
5lassware Washer is designed to accommodate beakers
and other wide-mouth laboratory glassware. The top rack
is not recommended for narrow-necked glassware.
The bottom rack of the SteamScrubber 5lassware Washer
is designed to accommodate flasks, beakers, culture tubes,
graduated cylinders, Erlenmeyer flasks, petri dishes, watch
glasses, BOD bottles, and a variety of other laboratory
glassware. There are a variety of inserts that are available
to accommodate the various types of glassware, as detailed
in Appendix D.
Lowering the Top Washer Arm
and Top Rack
The top rack of your SteamScrubber may be lowered to
accommodate taller glassware. Perform the steps listed
below to lower the washer arm and the top rack. Refer to
Figure 4-1 for help in lowering the washer arm. Figure 4-
2 illustrates how to remove the rail bumpers. Refer to
Figure 4-2 for help in lowering the top rack rails.
38 P#o%&ct Se#+ice -./00.122.341/