Chapter 3: Getting Started
Plastic release ring
Pressure relief button
36
Chapter 2: Prerequisites
To disconnect the hose-end coupling:
1. Turn off the hot water faucet.
2. Push the pressure relief button on the hose-end
coupling to relieve the water pressure.
3. Pull down on the plastic release ring on the hose-end
coupling to disconnect it from the faucet.
Your Next Step
The installation and setup of your 5lassware Washer is
now complete. To learn how to load and operate your
washer, proceed to Chapter 4: Using Your Washer. To
make a modification to the configuration of your washer,
proceed to Chapter 6: Modifying Your Washer. To
perform additional diagnostics on your washer, proceed to
Chapter 7: Troubleshooting. To learn about the
maintenance requirements for your washer, proceed to
Chapter 5: Maintaining Your Washer.
Figure 3-18
Fill hose
Drain hose
P#o%&ct Se#+ice -./00.122.341/