Removing The Washer Top, Back, And Side Panels - Labconco 44000 Series User Manual

Removing the Washer Top,
Back, and Side Panels
There may be times when you need to remove the washer
top, back, and side panels to clean, maintain, or repair your
washer. Refer to Figure 5-4 and follow the instructions
below to remove the top, back, and side panels of your
washer.
To remove the washer top, back, and side panels:
1. Turn off electrical power to the 5lassware Washer.
2. Remove all of the screws from the back panel of the
washer and remove the back panel.
3. Remove the two screws in the front of the washer that
attach the washer top to the sides.
4. Remove the two screws in the back of the washer that
attach the washer top to the sides.
5. Slide the washer top toward the rear. Lift the washer
top and remove.
6. Remove the two screws from each side of the washer
at the front edge.
7. Remove one screw at the rear of the washer.
8. Remove the side panels.
P#o%&ct Se#+ice -./00.122.341/
Chapter 5: Maintaining Your Washer
Figure 5-4
Remove four
screws that attach
the top to the sides.
Then, slide the
washer top toward
the rear of the
washer and lift to
remove.
57