Erasing Specified Areas Of Copies ("Frame Erase" Function) - Konica Minolta BIZHUB C203 User Manual

Application functions
7.19

Erasing specified areas of copies ("Frame Erase" function)

Copies can be produced by erasing unwanted areas around the original, such as the transmission information
on received faxes and the shadows of punched holes.
With frame erasing, the same width can be erased along all four sides of the original or a different width can
be erased along each side of the original.
1
Position the original to be copied.
– For details on positioning the original, refer to
2
Touch [Application], and then touch [Frame Erase].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Frame Erase screen appears.
3
Touch the button for the desired position to be erased.
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Frame Erase" function, touch [No].
C353/C253/C203
A: 0.1 mm to 50.0 mm
"Feeding the original" on page
7
2-6.
7-75