Installation Procedure - Rinnai Advance Operation And Installation Manual

Installation Procedure

Unpacking the Appliance and Associated Accessories
CHECKLIST
1. Engine (logset inside chamber)
2. Trim Kit (black provided as standard)
3. Frame
4. Flexi-pipe gas connection
5. Seal Strip, Advance only (for sealing appliance to enclosure)
6. Operation and Installation Instructions
7. Remote Control (battery included)
8. In-wall Control Panel complete with 2m cable (typically
supplied with Elevate and Amplify, provided with Advance if
spacer is not ordered)
9. Spacer, only for Advance models (ETR contains control panel)
10. Rinnai Zero Clearance Box and Zero Clearance Flue Kit
(decorative Installations only)
11. Rinnai Flexiliner Flue Kit (Masonry Installations only)
Optional
12. dress Guard
13. Stainless Steel Trims
14. 8m Extension Cable
Check for damage. If damage has occurred, contact your supplier for advice. Before
installation, check it is labelled for the correct gas type.
Remove the heater body assembly from the carton and position in front of the enclosure.
Rinnai New Zealand
Supplied with engine
Supplied separately
Supplied with engine
Supplied with spacer
Supplied with engine
Supplied with engine
Supplied separately
Supplied separately
Supplied separately
Supplied separately
Supplied separately
Supplied separately
Supplied separately
23
Reflection: 03-08