Rinnai Advance Operation And Installation Manual page 22

Flueing - decorative Fireplace
Outline of Flueing Components (flue supports and flue adaptor not shown)
Outer Heat Shield Pipe
(length 1.2m)
Stainless Inner Flue Pipe
(length 1.2m, diam.
100mm)
Clamp Sleeve
Zero Clearance Box
Rinnai New Zealand
Clamping
Spacer
Sealing Collar
(not supplied)
22
Flue Cowl
Twin-Skin Flue
(requires 25mm clearance
from combustibles)
Flame Fire
The inner flue should penetrate the box by
50mm. This is to ensure:
• Any residual heat in the box is ducted
away via the outer flue
• When the fire is installed the clamp sleeve
can be lowered to connect the fire spigot
to the flue
Reflection: 03-08