Control Panel Layout; Turning Off - Rinnai Advance Operation And Installation Manual

ETR Operation

Control Panel Layout

Lock
Flame
AM/PM Time/Temperature display
Clock Adjustment and Timer
Indicators
Override
Timer 1 and Timer 2
Temperature / Time Adjustment
AUTO OFF
ON/OFF
Turning On
Press the ON / OFF button to operate the heater. The ON indicator will glow green. The spark
generator will be heard before the burner ignites and the ON indicator glows red, indicating
that the burner is alight. The fan will come on automatically after four minutes after which
warm air can be felt coming from the top grill.
Note: If the heater does not ignite on initial use, this may be due to air remaining in the gas supply line. The
spark generator will only continue for 15 seconds. After this it will be necessary to press the ON / OFF button
OFF, then ON again.

Turning Off

Press the ON / OFF button to switch off the heater. The ON indicator will go out. The fan will
continue to operate for several minutes after the burner has gone out in order to cool the
appliance. do not unplug the appliance while the fan is running.
Room Temperature Adjustment
The room temperature and pre-set temperatures can only be displayed and adjusted when the
heater is running.
Press the button to increase the temperature setting or
temperature setting.
Rinnai New Zealand
Indicates lock function
High heat setting, fan on low speed, also overrides thermostat
Shows either the time of day, room and set temperatures or
coded error messages
Indicates that clock or dual timer programme is being set
Temporarily changes operation from ON to OFF or OFF to ON,
until next programmed setting is reached
Indicates that Timer 1 or Timer 2 has been selected to operate
Increases or decreases the temperature setting as well as
changing hours or minutes
When ON, thermostat turns heat down to OFF. When OFF,
thermostat turns heat down to low (prevents overheating in
small rooms)
Main switch for turning ON / OFF
9
button to decrease the
Reflection: 03-08