2-7.2 Jbat1 Clear Cmos; 2-7.3 Jp7 Built-In Lan Select (For 85Div-L Only) - SOLTEK SL-85DIV User Manual

2-7.2 JBAT1 Clear CMOS

When you have problem with rebooting your system, you can clear
CMOS data and restore it to default value. To clear CMOS with Jumper
JBAT1, please follow the steps below:
1. Power off system;
2. Set JBAT1 to Pin 2-3 closed.
3. After 2 or 3 seconds, return the JBAT1 setting
4. CMOS data are restored to default. Remember never clear CMOS
when system power is on.

2-7.3 Jp7 Built-in LAN Select (for 85DIV-L only)

Jp7 is designed to enable the built-in LAN Controller function. With
Jp7 open, the built-in LAN Controller is enabled, and you can use the
on-board Rj45 channel while you can also add another PCI LAN card
for one more LAN channel. With Jp7 closed, the on-board Rj45 chan-
nel is disabled.
Chapter 2 Hardware Setup
JBAT1
Clear CMOS
1 - 2 c l o s e d :
1
Normal Status
(default)
2 - 3 c l o s e d :
1
Clear CMOS
(For 85DIV-L only)
Jp7
Built-in LAN Select
Open: enabled
(default)
Closed: Disabled
27
to Pin1-2 closed.