SOLTEK SL-85DIV User Manual page 71

VIA Super IO Device
When this option is chosen, the following item appears for user's
configuration.
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x
UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x
ECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
* Onboard FDC
Controller
* Onboard Serial
Port 1 / Port 2
VIA SuperIO Device
Enabled
Auto
Auto
Normal
Half
378/IRQ7
SPP
3
201
330
10
Select Enabled if your system has a floppy drive
controller (FDC) installing in the system board and
you want to use it. If you install add-in FDC or the
system has no floppy drive, select Disabled in this
field.
The choices: Enabled; Disabled
Select a logical COM port name and matching
address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports.
Choices: Disabled; Auto;
3F8/IRQ4;
2F8/IRQ3;
3E8/IRQ4;
2E8/IRQ3
71
Chapter 4 BIOS Setup
Item Help
Menu Level