Table of Contents
Advertisement
AGP & P2P Bridge Control
When this option is chosen, the following item appears for user's
configuration.
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
AGP Aperture Size
AGP Mode
AGP Driving Control
AGP Driving Value
AGP Fast Write
AGP Master 1 WS Write
AGP Master 1 WS Read
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
* AGP Aperture Size Series of options are available: 4, 8, 16, 32, 64, 128
* AGP Mode This item allows you to select AGP Mode.
* AGP Driving Control This item allows you to adjust the AGP driving force.
* AGP Driving Value This item allows you to adjust the AGP driving force.
AGP & P2P Bridge Control
64M
2X
Auto
DA
Disabled
Disabled
Disabled
or 256 MB. Memory mapped and graphics data
structures can reside in a Graphics Aperture. This
area is like a linear buffer. BIOS will automatically
report the starting address of this buffer to the O.S.
The default setting is 64MB.
The choices: 1X; 2X; 4X
Choose Manual to key in a AGP Driving Value in the
next selection. This field is recommended to set in
Auto for avoiding any error in your system.
The choices: Manual; Auto
The choices: Min=0000 ~ Max=00FF
65
Chapter 4 BIOS Setup
Item Help
Menu Level
Advertisement
Table of Contents
