SOLTEK SL-85DIV User Manual page 76

85DIV / 85DIV-L
Always On
Suspend --> Off
All Modes --> Off
Video Off Method This determines the manner by which the monitor is
V/H SYNC + Blank
Blank Screen
DPMS Supports
MODEM Use IRQ Name the interrupt request (IRQ) line assigned to
Soft-Off by PWRBTN When Enabled, turning the system off by pressing
Run VGABIOS If S3
Resume
PWRON After PWR-
Monitor will remain on during power saving modes.
Monitor blanked when the systems enters the Suspend
mode.
Monitor blanked when the system enters either Suspend or
Standby modes.
blanked.
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to the
video buffer.
This option only writes blanks to the video buffer.
Select this option if you monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Elect-
ronics Standards to select video power management values.
the modem (if any) on your system. Activity of the
selected IRQ always awakens the system.
The choices: 3; 4; 5; 7; 9; 10; 11; NA.
the on/off button places the system in a very low-
power-usage state.
This item is to set the mode to run the VGA BIOS
when S3 (Suspen to RAM) resumes.
Choices: Auto (default); Yes; No
This item is to set the mode to power on when power
Fail resumes after power fails.
Choices: Off (default); On; Former Sts
76