Table of Contents
Advertisement
4-6.9 Frequency / Voltage Control
Run the "Frequency / Voltage Control" as following:
1. Choose "Frequency / Voltage Control" from the Main Menu and a
screen with a list of options will appear:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
AGP Vcore Select
DIMM Vcore Select
CPU Clock Ratio
Auto Detect DIMM/PCI CLK
Spread Spectrum
CPU Clock
x
Use CPU Linear Freq
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys.
<F1>: "Help" gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. The following item descriptions are provided as a quick
guide to your setup.
Frequency / Voltage Control
1.5V
2.5V
10X
Enabled
Disabled
100 MHz
Default
85
Chapter 4 BIOS Setup
Item Help
Menu Level
Advertisement
Table of Contents
