SOLTEK SL-85DIV User Manual page 61

CPU L2 Cache ECC
Checking
Quick Power On Self
Test
First/Second/Third/
Other Boot Device
Swap Floppy Drive When enabled, floppy drives A and B will be exchanging
Boot Up Floppy Seek When enabled, the BIOS tests (seeks) floppy drives
Boot Up NumLock
Status
When you select Enabled, it will speed up memory
checking when the external cache contains ECC
SRAMs.
The choices: Enabled; Disabled
Select Enabled to reduce the amount of time required to
run the power-on self-test (POST). A quick POST skips
certain steps. We recommend that you normally enable
quick POST.
The BIOS attempts to load the operating system from
the devices in the sequence selected in these items.
The choices: Floppy; LS/ZIP; HDD; SCSI; CDROM;
Disabled
without any physical connection and modification on the
cables.
to determine whether they have 40 or 80 tracks. Only
360-KB floppy drives have 40 tracks; drives with
270KB, 1.2MB, and 1.44MB capacity all have 80
tracks. Because very few modern PCs have 40-track
floppy drives, we recommend that you set this field
to disabled to save time.
Toggle between On or Off to control the state of
the NumLock key when the system boots. If On,
the numeric keypad is in numeric mode. If off, the
numeric keypad is in cursor control mode.
61
Chapter 4 BIOS Setup