Table of Contents
Advertisement
Chapter 4 BIOS Setup
Init Display First Initialize the AGP video display before initializing any
other display device on the system. Thus the AGP
display becomes the primary display.
OnChip USB Control-
Select Enabled if your system contains a Universal
ler
Serial Bus (USB) controller and you have USB
peripherals.
USB Keyboard Sup-
Select Enabled if your system contains a Universal
port
Serial Bus (USB) controller and you have a USB
keyboard.
IDE HDD Block Mode Block mode is also called block transfer, multiple
commands, or multiple sector read/write. If your IDE
hard drive supports block mode (most new drives
do), select Enabled for automatic detection of the
optimal number of block read/write per sector the
drive can support.
The choices: Enabled; Disabled
73
Advertisement
Table of Contents
