Table of Contents
Advertisement
ACPI Function Select Enabled only if your computer's operating
ACPI Suspend Type This item fixes the ACPI suspend type to S1 (Power
Power Management
Option
Max Saving
User Define
Min Saving
HDD Power Down When enabled and after the set time of system
Suspend Mode After the selected period of system inactivity, the
Video Off Option When enabled, this feature allows the VGA adapter
system supports the Advanced Configuration and
Power Interface (ACPI) specification. Currently,
Windows NT 5.0 supports ACPI.
On Suspend).
This option allows you to select the type (or degree)
of power saving for Doze, Standby, and Suspend
modes.
This table describes each power management
mode:
Maximum power savings. Only Available for SL CPUs.
Inactivity period is 1 minute in each mode.
Set each mode individually. Select time-out period in
the section for each mode stated below.
Minimum power savings. Inactivity period is 1 hour in
each mode (except the hard drive).
inactivity, the hard disk drive will be powered down
while all other devices remain active.
chipset enters a hardware suspend mode, stopping
the CPU clock and possibly causing other system
devices to enter power management modes. When
the Power management Option is "User Define", the
choices of this item are: Disabled; 1 min; 2 min; 4
min; 8 min; 10 min; 20 min; 40 min; 1 hour
to operate in a power saving mode.
75
Chapter 4 BIOS Setup
Advertisement
Table of Contents
