Table of Contents
Advertisement
4-6.8 SmartDoc Anti-burn Shield (PC Health status)
This section helps you to get more information about your system in-
cluding CPU temperature, FAN speed and voltage. It is recommended
that you contact your mainboard supplier to get proper values about
the setting of the CPU temperature.
Run the "SmartDoc Anti-burn Shield" as follows:
1. Choose "SmartDoc Anti-burn Shield" from the Main Menu and a screen
with a list of options will appear:
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
CPU Vcore
DDR DIMM
3.3V
+5V
+12V
-12V
-5V
5VSB
Voltage Battery
Temperature 1
Temperature 2
Fan 1 Speed
Fan 2 Speed
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
2. Use one of the arrow keys to move between options and modify the
selected options by using PgUp / PgDn / + / - keys.
<F1>: "Help" gives options available for each item.
<F5>: Get the previous values. These values are the values with which the
user starts the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
3. Press <ESC> to return to the Main Menu when you finish setting up
all items. The following item descriptions are provided as a quick
guide to your setup.
SmartDOC Anti-Burn shield
0
1.72V
1
2.46V
2
3.13V
3
5.02V
4
11.71V
5
(-)11.78V
6
(-)4.95V
7
5.05V
3.16V
35˚C
(-) 55˚C
4560 RPM
0 RPM
83
Chapter 4 BIOS Setup
Item Help
Menu Level
Advertisement
Table of Contents
