Via Onchip Pci Device - SOLTEK SL-85DIV User Manual

85DIV / 85DIV-L
* Primary
Master / Slave PIO
Secondary
Master / Slave PIO
* Primary
Master / Slave UDMA
Secondary
Master / Slave UDMA

VIA Onchip PCI Device

When this option is chosen, the following item appears for user's
configuration.
CMOS Setup Utility - Copyright (C) 1984-2001 Award Software
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
* VIA-3058 AC'97
Audio
* VIA-3068 MC97
Modem
Choose Auto or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose
Auto. You need to set to a lower mode than Auto
when your hard disk becomes unstable.
The choices: Auto; Mode 0; Mode 1; Mode 2; Mode
3; Mode 4
Ultra DMA33/66/100/133 implementation is possible
only if your IDE hard drive supports it, if the operat-
ing environment includes a DMA drive, and if your
system software supports Ultra DMA33/66/100/133.
Select "Auto" to enable BIOS support.
The choices: Auto; Disabled
VIA OnChip IDE Device
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Select "Disabled" to use the on-chip audio capability of
your system. Most of the field do not appear when this
field is "Disabled", for user who wants to use add-on sound
card, this item must be disabled.
This option allows you to decide to enable/disable
the Onchip Modem.
The choices: Auto; Disabled
70
Item Help
Menu Level