Line Group Routing; Using Line Group Routing - NEC DSX Feature Handbook

Features
122 | DSX |

Line Group Routing

Dial a single-digit code to place a call over the first available line in a Line Group.
Line Group Routing lets you just press
selects the first available line in your "dial 9" Line Group. This simplifies placing calls if your system has a lot of lines for
outgoing calls. Rather than press one of many line keys, just dial
Note that systems with Line Group Routing enabled cannot also dial Line Groups on page 123 access codes 90-98.

Using Line Group Routing

• By default, pressing Intercom and dialing 911 or lifting the handset and dialing 911 will not call emergency
services.
To place a call using Line Group Routing:
1. Lift the handset and press
2. Dial .
9
a) If you don't hear dial tone, Line Group Routing is not enabled. See Line Groups on page 123 instead.
b) If you hear busy tone and your extension has Line Queuing, you can dial
If you hang up, the system converts the queue to a Line Callback.
3. Dial your outside number.
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
INTERCOM and dial 9 to get a line for an outside call. Line Group Routing automatically
9
.
INTERCOM
instead.
to queue for a line to become free.
2
http://www.renderx.com/