NEC DSX Feature Handbook page 38

Features
38 | DSX |
Select the Call Forwarding sub-menu
+
Menu
Call
Forward
On
Off
Edit
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Setting Up Call Forwarding Off Premises (Super Display)
Turn Call Forwarding on (if set up and enabled).
Turn Call Forwarding on (if set up and enabled).
Set up your Call Forwarding options.
Immediate
See Call Forwarding on page 32 for more.
Ring No Answer
See Call Forwarding on page 32 for more.
Busy No Answer
See Call Forwarding on page 32 for more.
Select Off Premises Call Forwarding.
Off-Premise
Push to reroute your calls off premise using a number stored at
Number
your phone.
1. Do one of the following:
• Push
Line
should be forwarded, then enter the line number (1-64).
• Push Line Group to select a Line Group as the route over which
your call should be forwarded, then enter the line group number
(90-98).
• Push Primeline to choose your Prime Line as the route over which
your call should be forwarded.
2. Push .
Next
3. Enter the number (16 digits max.) you want the system to dial when
rerouting your call off premise.
4. Push .
Next
5. Push to forward all calls, or
All
6. Push to save your setup or
Save
Push
Speed Dial
in your Personal Speed Dial.
1. Push or
<< >>
• Push
View Number
• Push
View Name
2. Push .
Next
3. Push to forward all calls, or
All
4. Push to save your setup or
Save
to select a specific line as the route over which your call
to forward just outside calls.
Line Only
to quit without saving.
Cancel
to reroute your calls off premise using a number stored
to choose the Personal Speed Dial number.
to display the number.
to display the name.
to forward just outside calls.
Line Only
to quit without saving.
Cancel
http://www.renderx.com/