Microphone Mute; Using Microphone Mute; To Allow Or Prevent Incoming Voice Announcements To Your Keyset; To Allow Or Prevent Incoming Voice Announcements To Your Super Display - NEC DSX Feature Handbook

Microphone Mute

Talk to a co-worker in your office without your caller hearing the conversation.
Microphone Mute lets you turn off your phone's handset or Handsfree microphone at any time. When you are using Handsfree
or Handsfree Answerback, Microphone Mute mutes the Handsfree microphone. While talking on the handset, Microphone
Mute mutes the handset microphone.
Once activated, Microphone Mute prevents the caller from hearing conversations in your work area. You can turn off the
Handsfree or handset microphone while your telephone is idle, busy on a call, in DND or while an outside call is ringing.
Lifting the handset to answer a call automatically cancels Microphone Mute.

Using Microphone Mute

To activate or deactivate Microphone Mute:
1. Press .
MUTE
a) You can do this any time while on the phone or idle (except when an Intercom call is ringing).
b) Microphone Mute automatically cancels when you lift the handset.
c) If you are in the headset mode, Microphone Mute cancels when you press
2. While your extension has the microphone muted, an incoming voice-announced Intercom call will announce
with a single beep (splash tone).
To allow or prevent incoming voice
announcements to your keyset:
Next : Go to next selection.
of current option.
Exit
Select the Voice Announce sub-menu.
+
Menu
31
On
Off
Back
To allow or prevent incoming voice
announcements to your Super Display:
Setting Up incoming Voice Announcements (Super Display)
: Go to next selection.
Next
of current option.
Exit
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Setting Up Incoming Voice Announcements (Keyset)
Prev : Go to previous selection.
: Exit Menu setup.
Turn Voice Announce on.
If on, incoming Intercom calls will normally voice announce to your phone.
Turn Voice Announce off.
If off, incoming Intercom calls will normally ring your phone.
Back up to the previous level.
: Go to previous selection.
Prev
: Exit Menu setup.
SPEAKER
Select : Select current Option.
: Select current Option.
Select
http://www.renderx.com/
Features
DSX | | 133
.
Back : Back out
: Back out
Back