NEC DSX Feature Handbook page 30

Features
30 | DSX |
a) Announce the call to make a Screened Transfer.
• Hang up if your co-worker accepts the call.
b) Hang up to send the call through as an Unscreened Transfer.
c) Press the flashing line key to return to the call if your co-worker doesn't want it.
5. When you Transfer a call, it will recall to you if it is unanswered at the destination. If you don't answer the recall,
it diverts to Key Ring.
To set up Call Coverage key ringing at your keyset:
: Go to next selection.
Next
of current option.
+ Select the Call Coverage keys sub-menu.
Menu
+
41
Next
Select
To set up Call Coverage key ringing at your Super Display:
Menu + Select the Ring Assignments sub-menu.
Ringing
Key
A s s i g n m e n t s
To assign a Call Coverage key:
1. Push .
Menu
• Super Display: Push
• Keyset: Dial
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Setting Up Call Coverage Key Ringing (Keyset)
: Go to previous selection.
Prev
: Exit Menu setup.
Exit
Your Call Coverage keys will light. Press a key repeatedly to set its ringing mode.
Dial a digit (0-4) to set the Ring Type:
for Standard
0
for Ring Type A
1
for Ring Type B
2
for Ring Type C
3
Setting Up Call Coverage Key Ringing (Super Display)
Select the Key Assignments sub-menu.
Your Call Coverage keys will light. Press a key repeatedly to set its ringing
Call
mode.
Coverage
Dial a digit (0-4) to set the Ring Type:
for Standard
0
for Ring Type A
1
for Ring Type B
2
for Ring Type C
3
+
Key Assignment
.
51
: Select current Option.
Select
.
Feature Keys
http://www.renderx.com/
: Back out
Back