Setting The Incoming Page Volume Preset - NEC DSX Feature Handbook

To assign a Paging key:
1. Push .
Menu
• Super Display: Push
• Keyset: Dial .
51
2. See Feature Keys on page 89for more.
Setting the Incoming Page Volume
Preset
• This preset sets the default volume of your incoming Page announcements.
To set the Incoming Page Volume Preset at a keyset:
Setting up the Incoming Page Volume Preset (Keyset)
: Go to next selection.
Next
of current option. : Exit Menu setup.
Exit
Select the Incoming Page Volume Preset sub-menu
+
Menu
12
Turn the default incoming Page volume down.
Down
Up Turn the default incoming Page volume up.
Save your entry and back up to the previous level.
Back
To set up the Incoming Page Volume Preset at a Super Display:
Setting up the Incoming Page Volume Preset (Super Display)
: Go to next selection.
Next
of current option. : Exit Menu setup.
Exit
Select the Incoming Page Volume Preset sub-menu.
+
Menu
Volume
+
Off-Hook
Ring
Turn the default incoming Page volume down.
VOLUME
v
Turn the default incoming Page volume up.
VOLUME
^
Back Save your entry and back up to the previous level.
Exit to the idle menu display.
Exit
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
+
Key Assignment Feature Keys
: Go to previous selection.
Prev
: Go to previous selection.
Prev
.
: Select current Option.
Select
: Select current Option.
Select
http://www.renderx.com/
Features
DSX | | 145
: Back out
Back
: Back out
Back