Delayed Ringing; To Set Up Line Key Ringing At Your Keyset; To Set Up Line Key Ringing At Your Super Display - NEC DSX Feature Handbook

Features
60 | DSX |

Delayed Ringing

Helps you if you cover a co-worker's unanswered calls.
Delayed Ringing allows a line to start ringing a preset interval after the call starts flashing a line key. This is helpful if you
cover a co-worker's calls. For example, you can have Delayed Ringing for the lines that immediately ring a co-worker's
telephone. If your co-worker doesn't answer after the preset interval, the call will start ringing your phone.
To set up Line Key ringing at your
keyset:
: Go to next selection.
Next
of current option.
+ Select the Ring Key Assignments sub-menu.
Menu
41
Select
To set up Line Key ringing at your Super
Display:
+ Select the Ring Assignments sub-menu.
Menu
Ringing
Key
A s s i g n m e n t s
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Setting Up Line Key Ringing (Keyset)
: Go to previous selection.
Prev
: Exit Menu setup.
Exit
Your line keys will light. Press a line key repeatedly to set its ringing mode:
• Always (key LED is on green)
• Night Ring (key LED flashes slow green)
• Delay Ring (key LED flashes fast green)
• Lamp Only (key LED is on red)
Dial a digit (0-4) to set the Ring Type:
for Standard
0
for Ring Type A
1
for Ring Type B
2
for Ring Type C
3
Setting Up Line Key Ringing (Super Display)
Select the Key Assignments sub-menu.
Your line keys will light. Press a line key repeatedly to set its ringing mode:
Line
• Always (key LED is on green)
• Night Ring (key LED flashes slow green)
• Delay Ring (key LED flashes fast green)
• Lamp Only (key LED is on red)
Dial a digit (0-4) to set the Ring Type:
for Standard
0
: Select current Option.
Select
http://www.renderx.com/
: Back out
Back