NEC DSX Feature Handbook page 166

Features
166 | DSX |
Select the Call Forwarding sub-menu
+
Menu
Call
Forward
On
Off
Edit
To quickly turn off Call Forwarding and clear your Call Forwarding (Selectable Display Messaging)
setup:
1. Press .
CLEAR
2. Push
Call Forward
3. Push to clear Call Forwarding or
Yes
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
Setting Up Call Forwarding (Super Display)
Turn Call Forwarding on (if set up and disabled).
Turn Call Forwarding off (if set up and enabled).
Set up your Call Forwarding type and options.
Immediate
See Call Forwarding on page 32 for more.
Ring No Answer
See Call Forwarding on page 32 for more.
Busy No Answer
See Call Forwarding on page 32 for more.
Off-Premise
See Call Forwarding Off Premises on page 36 for more.
Display Message
Select a Selectable Display Message.
1. Push and to scroll through the messages.
< >
2. Push to select the displayed message
Next
a. Edit the message. See Names for Extensions and Lines on page 137 for help
with editing.
b. Push to save the edited message.
Save
c. Push to back up to the previous level.
Back
d. Push to cancel without saving the message.
Cancel
e. Push to exit to the idle menu display.
Exit
3. Push to back up to the previous level.
Back
4. Push to cancel without selecting the message.
Cancel
5. Push to exit to the idle menu display.
Exit
AME
See Answering Machine Emulation in the IntraMail Feature Handbook for more.
None
Remove your Call Forwarding setup.
( ).
Cfwd
to quit the procedure without clearing.
Cancel
http://www.renderx.com/