NEC DSX Feature Handbook page 162

Features
162 | DSX |
Being Monitored
b) You can place and answer calls normally. You automatically return to being monitored when your call is
done.
c) You do not receive voice-announcements, ringing, or Paging announcements.
d) While your telephone is idle, the Feature Key,
telephone and LEDs operate normally when you lift the handset.
4. Choose one of the following:
a) Push
Talk
b) Push
Exit
To disable Room Monitor at an extension:
1. Press .
DND
2. Push .
Off
To monitor an extension that has room monitor enabled:
1. Place an Intercom call to the extension you wish to monitor.
2. If you have a Call Coverage, Hotline, or Reverse Voice Over key for the extension you wish to monitor:
a) It lights orange if the extension has Room Monitor enabled.
b) It lights green when you start monitoring.
c) You can press it to monitor the destination extension.
3. If the extension you called has Room Monitor enabled:
a) You see:
Monitoring
b) You automatically start monitoring the extension.
c) While monitoring, you can place and answer calls normally and receive Paging announcements. You
automatically return to monitoring when your call is done.
4. Choose one of the following:
a) Push
Talk
b) Push
Exit
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
(if more than one extension is monitoring your phone).
to place an intercom call to the extension that is monitoring you.
to end the monitoring session.
(name or extension number).
to place an intercom call to the extension that is monitoring you.
to end the monitoring session.
, and LEDs don't light. However, your
SPEAKER INTERCOM
http://www.renderx.com/