Ink Discharge Way Cleaning [Drain Wash] - MIMAKI Tx2-1600 Operation Manual

Ink discharge way cleaning [DRAIN WASH]

The ink discharge way may become clogged by coagulated ink. It must be cleaned at regular
intervals to avoid clogging.
Ink dischar g e way: Tubing between the cap and the waste ink tank
• Do not move the carriage out of the capping station by hand.
Use the appropriate operation key to move the carriage.
Cleaning Tools :
STEPS:
1. Select [STATION] from [MAINTENANCE].
(See page 4.3)
2. Press the [ENTER] key.
3. Press the JOG keys [ ] and [ ] to select [DRAIN
WASH].
4. Press the [ENTER] key.
The table moves backward, the Y-bar moves to the top, the
wiper moves forward, and the carriage moves on the table.
Dry suction starts in cycles consisting of 10 seconds of suction
followed by 10 seconds of pause.
5. Open the maintenance cover.
• Cleaning liquid bottle kit A29 (SPC-0137 : Option)
• Syringe
Remove these screws
- 4.17 -
M A I N T E N A N C E
S T A T I O N < e n t >
S T A T I O N M A I N T
M A I N T : CA R R I AGE ou t
S T A T I O N M A I N T
M A I N T : DRA I N WASH
D RA I N WAS H
C OM P L E T E D : en t