Specifications - Sanyo VCC-4374P Instruction Manual

Colour ccd camera
Table of Contents

Advertisement

SPECIFICATIONS

Camera:
Scanning system
Interlace
Image device
Picture elements
Effective picture elements
Synchronizing system
Resolution
Video output level
Video S/N ratio
Minimum required
illumination
(incandescent lighting)
Control terminal
Electronic shutter
Backlight compensation
Iris function
Electronic iris range
15
English
: PAL standard
(625 TV lines, 25 frames/sec.)
: PLL 2:1 interlace
: 1/3 inch solid state image device
CCD
: 795 (H) x 596 (V)
: 752 (H) x 582 (V)
: Internal sync, External sync
(Automatic switching), Line lock
: 460 TV lines horizontally, 400 TV
lines vertically
: 1.0 Vp-p/75 ohms, composite
: More than 48 dB
: Approx. 0.07 lux with a F 1.2 lens
(B/W mode),
Approx. 1.4 lux with a F 1.2 lens
(colour mode)
: Manual colour/black and white
setting
: 8 speeds, selectable by switches:
(1/50, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000 sec.)
: Manual ON/OFF switching,
Multi-zone light measuring system
(Active when using an auto-iris lens)
: Manual ON/OFF switching
: 1.4 lux to 70,000 lux (F 1.2, lens:
colour mode)
2.0 lux to 100,000 lux (F 1.4, lens:
colour mode)
Flange-back
White balance
Lens mount
Environmental conditions
Power supply
Power requirement
Weight
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
: 12.5 mm ± 0.5 mm
: ATW/Manual switching
: CS mount (or C mount with the
supplied adaptor)
: Temperature: –10˚C ~ +50˚C
Humidity: less than 90%
(no condensation)
: 24 V AC, 50 Hz
: 4.0 W (with auto iris lens)
3.2 W (without auto iris lens)
: Approx. 450 g (without lens)

Advertisement

Table of Contents
loading

Table of Contents