Advertisement
SPECIFICATIONS
Scanning system
Interlace
Image device
Picture elements
Effective picture elements
Synchronizing system
Resolution
Video output level
Video S/N ratio
Minimum required
illumination
(incandescent lighting)
Backlight compensation
Electronic iris function
Mirror image
Electronic iris range
Flange-back
Gamma correction
Lens mount
Environmental conditions
Power supply
13
English
: EIA standard (525 TV lines, 30
frames/sec.)
: PLL 2:1 interlace
: 1/3 inch solid state image device CCD
: 542 (H) x 492 (V)
: 512 (H) x 492 (V)
: Line lock
: 400 TV lines horizontally, 350 TV
lines vertically
: 1.0 Vp-p/75 ohms, composite
: More than 50 dB
: Approx. 0.07 lux with a F 1.2 lens,
approx. 0.1 lux with a F 1.4 lens
: Manual ON/OFF switching, zone light
measuring system
(Active when using an auto-iris lens)
: Manual ON/OFF switching
: Manual ON/OFF switching
: 0.07 lux to 42,000 (F 1.2, lens)
0.1 lux to 57,000 (F 1.4, lens)
: 12.5 mm ± 0.8 mm
: γ = 0.45
: CS mount (or C mount with the
supplied adaptor)
: Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
: 24 V AC, 60 Hz
Power consumption
Weight
Dimensions
108.5
99.5
1.5
11
1/4"–20 UNC
12
22
Features and specifications are subject to change without prior
notice or obligations.
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
: 2.3 W (with auto iris lens)
1.4 W (without auto iris lens)
: Approx. 330 g (without lens)
56
VIDEO OUT
45
LINE
PHASE
28
POWER
Advertisement
