B/W CCD Camera
Scanning system : CCIR standard (625 scanning lines, 25 frames/sec.)
Interlace : PPL 2:1 interlace
Image device : 1/3 inch solid state CCD
Number of pixels : 795 (Horizontal) x 596 (Vertical)
Number of pixels in image area : 752 (Horizontal) x 582 (Vertical)
Synchronizing system : Internal sync/ Line lock (manually switched)
External sync (automatic switched)
Resolution : 570 TV lines
Video output terminal : 1.0 Vp-p/75 Ω, composite
Image S/N ratio : 50 dB min.
Electronic shutter speed : 1/50 - 1/100,000 sec.
Minimum required illumination : 0.07 lux approx. (with F 1.2 lens, 50 IRE)
Backlight compensation ON/OFF : Set to "ON" or "OFF"
Auto Iris lens output : DC output (variable DC level), 4-pin terminal
Lens mount : CS mount
Flange-back : 12.5 mm (adjustment range : ± 0.5 mm)
Auto Iris lens switching : EI/VIDEO/DC
Attachment screw hold diameter : 1/4"- 20UNC (top or bottom surface)
Operating environment : Ambient temperature: -10 to + 50 °C (14 to 122 °F)
Humidity: 90 % RH max.
Power supply : 24 V AC/50Hz, 12 - 15 V DC
Power consumption : 3.0W approx.
Weight : 245 g approx.
The components designated by a symbol (
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
PRODUCT SAFETY NOTICE
) in this schematic diagram designates components whose value are of
(Product Code : 117 076 01)
(Asia, Mideast, China)
(Australia, New Zealand)
REFERENCE No. SM5310534