Using The Buttons For Setting And Adjustment - Sanyo VCC-P6784 Instruction Manual

Using the Buttons for Setting and Adjustment

Using the Optional Camera Control Unit (VAC-70)
You can set and adjust the camera remotely using the optional camera
control unit.
For details, refer to the instruction manual supplied with the VAC-70.
• Be sure to disconnect the camera control unit after you complete
setting up the camera.
• Avoid connecting the camera control unit via a cable compensator or
video distribution amplifier.
Doing so may prevent remote control of your camera.
(VAC-70)
1
(Camera)
SET
2
3
Using the Buttons on the Camera
You can set and adjust the camera directly using the buttons provided on
the camera.
■ To display the main menu
VAC-70 : Press the MENU button 1.
Camera : Press and hold the SET button 3 for about 1 second.
■ To set menu items
• Use the Selection buttons 2 to select the item and then
change the set value.
• Press the SET button 3 to go to the preference setting
screen.
■ To adjust the zoom
• Use the Selection buttons 2 when the live video is shown on
the monitor (when no setting screen is displayed).
: Press c.
Zoom In (Tele)
Zoom Out (Wide) : Press d.
10
GB