Snmp - Planet GRT-504 User Manual

7.9.3 SNMP

Simple Network Management Protocol (SNMP) is the protocol not only governing network
management, but also the monitoring of network devices and their functions.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. This router support MIB I & II.
Move the cursor " >> " to snmp and press enter.
>> community
trap
5 entries of SNMP community can be configured in this system.
Move the cursor to community and press enter.
----------------------------------------------------------------------
Command: admin snmp community <1~5> <more...>
Message: Please input the following information.
Community entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit
list
Move the cursor to edit and press enter. You can setup the following:
Validate : Set Enable or Disable
Community : Key in the string
Access right : Set Read only, Read Write or Denied
Move the cursor to list and press enter, you can view full listing on SNMP Community Pool.
5 entries of SNMP trap are allowed to be configured in this system.
Move the cursor to trap and press enter.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow:
>> edit
list
Configure community parameter
Configure trap host parameter
Edit community entry
Show community configuration
Edit trap host parameter
Show trap configuration
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
127