Table of Contents
Advertisement
7.1.3 Operation Interface
For serial console and Telnet management, the Router implements two operational interfaces:
Command Line Interface (CLI) and menu driven interface. The CLI mode provides users a simple
interface, which is better for working with script file. The menu driven interface is a user-friendly
interface to general operations. The command syntax for CLI is the same as that of the menu
driven interface. The only difference is that the menu driven interface shows you all of available
commands for you to select. You don't need to remember the command syntax and save your
time on typing the whole command line.
The following figure gives you an example of the menu driven interface. In the menu, you scroll
up/down by pressing key I / K, select one command by key L, and go back to a higher level of
menu by key J.
For example, to show the system information, just logon to the Router, move down the cursor by
pressing key K twice and select "show" command by key L, you shall see a submenu and select
"system" command in this submenu, then the system will show you the general information.
7.1.4 Window structure
From top to bottom, the window is divided into four parts:
1.
Product name: "SHDSL.bis ROUTER"
2.
Menu field: Menu tree prompts on this field. Symbol ">>" indicates the cursor place.
3.
Configuring field: You will configure the parameters in this field. < parameters > indicates
the parameters you can choose and < more...> indicates that there have submenu in the
title.
4.
Operation command for help
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
106
Advertisement
Table of Contents
