Table of Contents
Advertisement
The screen will prompt as follow:
------------------------------------------------------------------------
Command: admin user modify 5 profile <name> <pass_conf>
Message: Please input the following information.
Legal user name (ENTER for default) <superman>: tester
Input the old Access password: **
Input the new Access password: **
Re-type Access password: **
------------------------------------------------------------------------
Finally, you can use list command to check the listing of five profiles including on user name and
their UI mode.
The screen will prompt as follow:
------------------------------------------------------------------------
Legal Access User Profile
No
User Name
---- ------------------ -----------
1
test
2
test-1
3
test-2
4
test-3
5
superman
------------------------------------------------------------------------
7.9.2 Security
Security command can be configured sixteen legal IP address for telnet access and telnet port
number.
Move the cursor " >> " to security and press enter.
>> port
ip_pool
list
Move the cursor to port and press enter. You can setup port number form 1 to 65534.
Move the cursor to IP Pool and press enter, there are sixteen legal IP address for telnet access.
The default legal address is 0.0.0.0. It means that there is no restriction of IP to access the router
via telnet.
Move the cursor to list and press enter, you can view full listing on security profile including the
Telnet listing TCP port and 16 host IP address.
UI Mode
Menu
Menu
Command
Command
Menu
Configure telnet TCP port
Legal client IP address pool
Show security profile
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
126
Advertisement
Table of Contents
