Cpe Side - Planet GRT-504 User Manual

GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
Type the WAN1 Parameters;
VPI: 0
VCI: 32
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA + NAT or EoA + NAT
Note: The Protocol used in CO and CPE have to be the same.
Click Next to setup the IP parameters.
For more understanding about NAT, review the chapter of NAT/DMZ .
IP Address: 192.168.20.1
Subnet Mask: 255.255.255.0
Gateway: 192.169.30.2
Click Next
The screen will prompt the parameters that we will write in NVRAM. Check the parameters before
writing in NVRAM.
Press Restart to restart the router working with new parameters or press continue to setup another
parameter.
6.6.2.2

CPE side

Click ROUTE and CPE Side then press Next.
102