Multi–Link Mode
For 4-wire model, each pair will connect to two different remote device, which may or may not be
in the same location.
6.2.1.3
TCPAM stands for Trellis Coded Pulse Amplitude Modulation. It is the modulation format that is
used in both HDSL2 and SHDSL, and provides robust performance over a variety of loop
conditions. SHDSL.bis supports 16 level TCPAM line code(TPCAM-16) or 32 level TCPAM line
code(TCPAM-32) to provide a rate/reach adaptive capability, offering enhanced performance
(increased rate or reach) and improved spectral compatibility.
assign the different type manually by click the caption TPCAM-16 or TPCAM-32.
6.2.1.4
For 2-wire model (n*64kbps)
You can setup the SHDSL.bis data rate in the multiple of 64kbps.
The default data rate is 5696Kbps (n=89).
For using Annex AF or BG
TCPAM32 ; data rate is 768Kbps ~ 5696Kbps (Nx64kbps, N=12~89)
TCPAM16 ; data rate is 192Kbps ~ 3840Kbps (Nx64kbps, N=3~60)
For uning Annex A or B
TCPAM16 ; 192Kbps ~ 2304Kbps (Nx 64kbps, N=3~36)
For 4-wire model (n*128kbps)
You can setup the SHDSL.bis data rate in the multiple of 128kbps.
The default data rate is 11392Kbps (n=89).
For using Annex AF or BG
TCPAM32 ; data rate is 1536Kbps ~ 11392Kbps (Nx128kbps, N=12~ 89)
TCPAM16 ; data rate is 384Kbps ~ 7680Kbps (Nx128kbps, N=3~60)
For using Annex A or B
TCPAM16 ; 384Kbps ~ 4608Kbps (Nx 128kbps, N=3~36)
For adaptive mode, you have to setup n=0. The router will adapt the data rate according to the line
status.
Annex A/B
TCPAM-16 192~2304 kbps
Annex AF/BG
TCPAM-16 192~3840 kpbs
TCPAM-32 768~5696 kpbs
TCPAM Type
Data Rate
2-wire model
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
The default option is Auto. You may
4-wire model
384~4608 kbps
384~7680 kbps
1536~11392 kbps
48