Lan; Ip Share; Nat - Planet GRT-504 User Manual

Authe command can configure authentication code.
You can review the list of RIP parameters via list command.

7.12.9 LAN

LAN interface parameters can be configured LAN IP address, subnet mask and NAT network type.
>> Ip_type
Address
Attrib

7.12.10 IP share

You can configure Network Address Translation (NAT), Port Address Translation (PAT) and
Demilitarized Zone (DMZ) parameters in ip_share menu.
7.12.10.1
NAT (Network Address Translation) is the translation of an Internet Protocol address (IP address)
used within one network to a different IP address known within another network. One network is
designated the inside network and the other is the outside. Typically, a company maps its local
inside network addresses to one or more global outside IP addresses and reverse the global IP
addresses of incoming packets back into local IP addresses. This ensure security since each
outgoing or incoming request must go through a translation process, that also offers the
opportunity to qualify or authenticate the request or match it to a previous request. NAT also
conserves on the number of global IP addresses that a company needs and lets the company to
use a single IP address of its communication in the Internet world.
To configure Network Address Translation (NAT), Move the cursor ">>" to ip_share then press
enter.
>> nat
pat
dmz
You can configure NAT parameters in nat menu.
>> virtual
global
Fixed
The virtual menu contains range of virtual IP address, delete virtual IP address, and show virtual
IP address.
>> range
delete
List
IP type
LAN IP address and subnet mask
NAT network type

NAT

Configure network address translation
Configure port address translation
Configure DMZ host function
Virtual IP address pool
Global IP address pool
Fixed IP address mapping
Edit virtual IP address pool
Delete virtual IP address pool
Show virtual IP address pool
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
141