Ipqos - Planet GRT-504 User Manual

7.12.12 IPQoS

IP QoS is a function to decide the priorities of setting IPs to transfer packets under the situation of
overloading bandwidth.
To configure IP QoS function, move the cursor to IPQoS and press enter.
>> active
add
delete
modify
list
Command
Active Enable the IP QoS function
Add Add parameters of IP QoS
Delete Delete the IP QoS parameter
Modify Modify the IP QoS parameter
List View the IP QoS configuration
When use the add command, it will show the following:
>> protocol
local_ip
remote_ip
Port
description
Enable
precedence
Command
Protocol Set up the port protocol type (ANY, TCP or UDP)
Local_ip Configure the local IP address
Remote_ip Configure the remote IP address
Port Configure the port range
Description Define the description of policy
Enable Enable the policy
Precedence Define the priority of the policy
Trigger IP QoS function
Add IP QoS policy
Delete IP QoS policy
Modify IP QoS policy
Show IP QoS policy table
Configure protocol
Configure local IP parameter
Configure remote IP parameter
Configure port parameter
Policy description
Enable the policy
Configure precedence parameter
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
Description
Description
148