Table of Contents
Advertisement
7.3
Enable
To setup the router, move the cursor " >>" to enable and press enter key. While the screen
appears, type the supervisor password. The default supervisor password is root. The password
will be prompted as " * " symbol for system security.
----------------------------------------------------------------------
Command: enable <CR>
Message: Please input the following information.
Supervisor password: ****
----------------------------------------------------------------------
In this sub menu, you can setup management features and upgrade software, backup the system
configuration and restore the system configuration via utility tools.
For any changes of configuration, you have to write the new configuration to NVRAM and reboot
the router to work with new setting.
The screen will prompt as follow.
>> enable
setup
status
show
write
reboot
ping
admin
utility
exit
Command Description:
Command
enable
Modify command privilege. When you login via serial console or Telnet, the
router defaults to a program execution (read-only) privileges to you. To change
the configuration and write changes to nonvolatile RAM (NVRAM), you must
work in enable mode.
setup
To configure the router, you have to use the setup command.
status
View the status of router.
show
Show the system and configuration of router.
write
Update flash configuration. After you have completed all necessary setting,
make sure to write the new configuration to NVRAM by "write" command and
reboot the system, or all of your changes will not take effect.
reboot
Reset and boot system. After you have completed all necessary setting, make
sure to write the new configuration to NVRAM and reboot the system by
"reboot" command, or all of your changes will not take effect.
ping
Internet ping command.
admin
You can setup management features in this command.
utility
Upgrade software and backup and restore configuration are working via "utility"
command.
exit
Quit system
Modify command privilege
Configure system
Show running system status
View system configuration
Update flash configuration
Reset and boot system
Packet internet groper command
Setup management features
TFTP upgrade utility
Quit system
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
Description
109
Advertisement
Table of Contents
