Table of Contents
Advertisement
7.8
Ping
Ping command will be used to test the Ethernet connection of router or Internet linking condition.
Move cursor " >> " to ping and press enter.
----------------------------------------------------------------------
Command: ping <ip> [1~65534|-t] [1~1999]
Message: Please input the following information.
IP address <IP> : 10.0.0.1
Number of ping request packets to send (TAB select): -t
Data size [1~1999]: 32
----------------------------------------------------------------------
There are 3 parameters for ping command:
<ip> [1~65534|-t] [1~1999]
IP address: The IP address which you want to ping.
Number of ping request packed to send, key TAB for further selection:
Default: It will send 4 packets only
1~65534: Set the number of ping request packets from 1 to 65534
-t : It will continuous until you key Ctrl+C to stop
Data Size: From 1 to 1999
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
124
Advertisement
Table of Contents
