Related Manuals for Planet GS-4210-24P2S
Summary of Contents for Planet GS-4210-24P2S
- Page 1 24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch GS-4210-24P2S Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Contents ..................3 2. Requirements ..................... 4 3. Terminal Setup ................... 5 4. Logon to the Console .................. 6 5. Configuring IP Address via the Console ............7 6. Saving the Configuration via the Console ............9 7. Starting Web Management .................10 8. Saving Configuration via the Web ...............13 9. Recovering Back to Default Configuration .............14 10. -
Page 3: Package Contents
1. Package Contents Thank you for purchasing PLANET 24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch, GS-4210-24P2S. “PoE Managed Switch” mentioned in this quick installation guide refers to the GS-4210-24P2S. Open the box of the PoE Managed Switch and carefully unpack it. The box should contain the following items: z The GS-4210-24P2S x 1... -
Page 4: Requirements
2. Requirements z Workstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later, Linux, UNIX, or other platforms are compatible with TCP/IP protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Serial Port Connection (Terminal) The above Workstations come with COM Port (DB9) or USB-to-RS-232 converter. The above Workstations have been installed with terminal emulator, such as Hyper Terminal included in Windows XP/2003. -
Page 5: Terminal Setup
3. Terminal Setup To configure the system, connect a serial cable to a COM port on a PC or notebook computer and to RJ-45 type of console port of the PoE Managed Switch. PC / Workstation with Terminal emulation software PoE Managed Switch RS-232 to RJ-45 Cable Serial Port Serial Port 115200,8,n,1 Figure 3-1: PoE Managed Switch Console Connectivity A terminal program is required to make the software connection to the PoE Managed Switch. -
Page 6: Logon To The Console
4. Logon to the Console Once the terminal is connected to the device, power on the PoE Managed Switch and the terminal will run self testing procedures. Then, the following message asks to login user name and password. The factory default user name and password are shown as follows and the login screen in Figure 4-1 appears. -
Page 7: Configuring Ip Address Via The Console
To check the current IP address or modify a new IP address for the PoE Managed Switch, please use the procedures as follows: Display of the current IP address 1. On “GS-4210-24P2S#” prompt, enter “show ip”. 2. The screen displays the current IP address, Subnet Mask and Gateway shown in Figure 5-1. - Page 8 Configuration of the IP address 3. On “GS-4210-24P2S#” prompt, enter “configure”. 4. On “GS-4210-24P2S (config)#” prompt, enter the following command and press <Enter> as shown in Figure 5-2. GS-4210-24P2S (config)# ip address 192.168.1.100 mask 255.255.255.0 GS-4210-24P2S (config)# ip default-gateway 192.168.1.254 The previous command would apply the following settings for the PoE Managed Switch.
-
Page 9: Saving The Configuration Via The Console
RAM to FLASH by save command or copy running-config startup-config command, so that the running configuration sequence becomes the startup configuration file, which is called configuration save. 1. On “GS-4210-24P2S#” prompt, enter “copy running-config startup-config” as shown in Figure 6-1. Figure 6-1: Saving the Configuration Screen... -
Page 10: Starting Web Management
7. Starting Web Management The following shows how to start up the Web Management of the PoE Managed Switch. Note the PoE Managed Switch is configured through an Ethernet connection. Please make sure the manager PC must be set on the same IP subnet address. - Page 11 2. When the following dialog box appears, please enter the default user name and password “admin”. The login screen in Figure 7-2 appears. Default Username: admin Default Password: admin Figure 7-2: Web Login Screen 3. After entering the password, the main screen appears as Figure 7-3 shows. Figure 7-3: Web Main Screen of PoE Managed Switch...
- Page 12 The Switch Menu on the left of the Web page lets you access all the commands and statistics the PoE Managed Switch provides. Figure 7-4: Switch Menu Now, you can use the Web management interface to continue the Switch management. Please refer to the user’s manual for more.
-
Page 13: Saving Configuration Via The Web
8. Saving Configuration via the Web In the PoE Managed Switch, the running configuration file stores in the RAM. In the current version, the running configuration sequence of running-config can be saved from the RAM to FLASH by “Save Configurations to FLASH” function, so that the running configuration sequence becomes the startup configuration file, which is called configuration save. -
Page 14: Recovering Back To Default Configuration
10 seconds. After the device is rebooted, you can login the Web interface management within the same subnet of 192.168.0.xx. GS-4210-24P2S 1000 10/100 PoE In-Use 1000 RESET Figure 9-1: GS-4210-24P2S Reset Button... -
Page 15: Customer Support
PLANET online FAQ: http://www.planet.com.tw/en/support/faq.php?type=1 Switch support team mail address: support_switch@planet.com.tw GS-4210-24P2S User’s Manual: http://www.planet.com.tw/en/support/download.php?type1=1&model=48553&type=3 Copyright © PLANET Technology Corp. 2014. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. - Page 16 This page is intentionally left blank...