GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
5.2
Install the SHDSL.bis Router
!
To avoid possible damage to this Router, do not turn on the router before Hardware Installation.
Connect the power adapter to the port labeled DC-IN on the rear panel of the product.
Connect the Ethernet cable.
Note: This router supports auto-MDIX switching so both straight through and cross-over
Ethernet cable can be used.
Connect the phone cable to the router and the other side of phone cable to wall jack.
Connect the power adapter to power source inlet.
Turn on the PC or NB, which is used for configuration the Router.
4-port router with complex network topology
27