Table of Contents
Advertisement
----------------------------------------------------------------------
Command: setup ip_share pat modify <1~10>
Message: Please input the following information.
Virtual server entry number <1~10>: 1
----------------------------------------------------------------------
After key in enter, the screen will prompt as below.
>> interface
port
server
protocol
name
begin
end
Set the active interface number via interface command.
You can configure the global port number by using port command.
The local server, host, IP address, and port number are configured via server command.
The authorized access protocol is setup via protocol command.
Name command can be used to configure the service name of the host server.
Begin and end command is used to setup the local server schedule to access.
You can view the fixed NAT mapping entry via list command.
7.12.10.3
DMZ (demilitarized zone) is a computer host or small network inserted as a "neutral zone"
between a company private network and the outside public network. It prevents outside users from
getting direct access to a server that has company private data.
To setup demilitarized zone, move the cursor ">>" to dmz and press enter.
>> active
address
You can enable the demilitarized zone via active command.
After enabling the DMZ, shift the cursor to address and press enter.
----------------------------------------------------------------------
Command: setup ip_share dmz address <ip> <1~10>
Message: Please input the following information.
Virtual IP address: 192.168.0.251
Active interface number (Enter for default) <1>: 1
Active interface
TCP/UDP port number
Host IP address and port number
Transport protocol
Service name
The schedule of beginning time
The schedule of ending time
DMZ
Trigger DMZ host function
Configure virtual IP address and interface
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
144
Advertisement
Table of Contents
