Bridge - Planet GRT-504 User Manual

7.12.4 Bridge

You can setup the bridge parameters in bridge command. If the product is configured as a router,
you do not want to setup the bridge parameters.
Move the cursor " >> " to bridge and press enter.
>> gateway
static
You can setup default gateway IP via gateway command.
You can setup 20 sets of static bridge in static command. After entering static menu, the screen
will prompt as below:
>> deny_PCs
add
delete
modify
list
You can deny PCs to access Internet for security purpose.
After enter add menu, the screen will prompt as follow
>> mac
lan_port
wan1_port
wan2_port
wan3_port
wan4_port
wan5_port
wan6_port
wan7_port
wan8_port
Default gateway
Static bridging table
Deny PCs to access Internet
Add static MAC entry
Delete static MAC entry
Modify static MAC entry
Show static bridging table
Configure MAC address
Configure LAN interface bridging type
Configure WAN1 interface bridging type
Configure WAN2 interface bridging type
Configure WAN3 interface bridging type
Configure WAN4 interface bridging type
Configure WAN5 interface bridging type
Configure WAN6 interface bridging type
Configure WAN7 interface bridging type
Configure WAN8 interface bridging type
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
137