Supervisor Password And Id - Planet GRT-504 User Manual

GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
Move the cursor to edit and press enter, you can setup the following:
Version: Disable, 1 or 2
Trap host IP address: Key in the IP address
Community: Key in the string
Move the cursor to list and press enter, you can view full listing on SNMP Trap Host Pool.

7.9.4 Supervisor Password and ID

The supervisor password and ID is the last door for security but the most important. Users who
access the router via web browser have to use the ID and password to configure the router and
users who access the router via telnet or console mode have to use the password to configure the
router. Suggest to change the ID and password after the first time of configuration, and save it. At
next time when you access to the router, you have to use the new password.
----------------------------------------------------------------------
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password: ****
Input new Supervisor password :
********
Re-type Supervisor password: ********
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: admin id <pass_conf>
Message: Please input the following information.
Legal user name (Enter for default) <root> : test
----------------------------------------------------------------------
128