Status Window - Planet GRT-504 User Manual

You can configure three time servers in this system with time_server1, time_server2, and
time_server3.
The default time servers are the following:
time_server1 : ntp-2.vt.edu
time_server2 : ntp.drydog.com
time_server3 : ntp1.cs.wisc.edu
Move the cursor to update_rate and press enter.
----------------------------------------------------------------------
Command: admin sntp update_rate <10~268435455>
Message: Please input the following information.
Update period (secs) (Enter for default) <3600> : 86400
----------------------------------------------------------------------
Move the cursor to time_zone and configure where your router is placed. The easiest way to know
the time zone offset hour is from your PC clock. Double click the clock at the right corner of monitor
and check the time zone of your country. There will have a (GMT+XX:XX) or (GMT-XX.XX)
information.
----------------------------------------------------------------------
Command: admin sntp time_zone <-12~12>
Message: Please input the following information.
GMT time zone offset (hours) (Enter for default) : -8
----------------------------------------------------------------------
Move the cursor to list for review the SNTP setting.
----------------------------------------------------------------------

Status Window...

Time Synchronization Parameters
Method
Service
Time Server 1
Time Server 2
Time Server 3
Update Period
GMT Time Zone Offset
----------------------------------------------------------------------
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
: SNTP v4.0
: Enable
: ntp-2.vt.edu
: ntp.drydog.com
: ntp1.cs.wisc.edu
: 3600 secs
: 8 hours
130