Menu Driven Interface Commands - Planet GRT-504 User Manual

The following table shows the parameters in the brackets.
Command
<ip>
<Route|Bridge>
[1~1999]
[1~65534|-t]

7.1.5 Menu Driven Interface Commands

Before changing the configuration, familiarize yourself with the operations list in the following table.
The operation list will be shown on the window.
Keystroke Description
[UP] or I Move to above field in the same level menu.
[DOWN] or K Move to below field in the same level menu.
U Move to top field in the same level menu
O Move to bottom field in the same level menu
[LEFT] or J Move back to previous menu
[RIGHT] or L Move forward to submenu
[ENTER] Move forward to submenu
[TAB] To choose another parameters
Ctrl + C To quit the configuring item
Ctrl + D Disconnection
Ctrl + U Hot-key switch to command line interface
Ctrl + Q Display help menu
An item enclosed in brackets is required. If the item is shown in lower
case bold, it represents an object with special format. For example,
<ip> may be 192.168.0.3.
Two or more items enclosed in brackets and separated by vertical
bars means that you must choose exactly one of the items. If the item
is shown in lower case bold with leading capital letter, it is a command
parameter. For example, Route is a command parameter in
<Route|Bridge>.
An item enclosed in brackets is optional.
Two or more items enclosed in brackets and separated by vertical
bars means that you can choose one or none of the items.
Menu Driven Interface Commands
GRT-504 4-Wire G.SHDSL.bis Firewall Router User's Manual
Description
107