Moving Your Printer - Tektronix PHASER 380 User Manual

Moving your printer

Waiting 45 minutes before moving
Before moving the printer, follow these three important steps as described
later in detail.
Turn off the printer and wait for at least 45 minutes.
1.
Remove the maintenance tray (B).
2.
Lock the transit restraint.
3.
To avoid damaging the printer, let the printer cool down for at
Caution
least 45 minutes before you move it so that the ink has time to
solidify. Failure to wait 45 minutes will likely result in an ink
spill that will damage the printerÕs internal components.
Before you move the printer, wait for the printer to display the Ready
message or the printerÕs network name, then turn off the printer using the
rear-panel On/Off switch.
The printer weighs about 100 kg (220 lbs.). Do not attempt to
Warning
lift the printer without the assistance of others. Always use the
four pull-out handles located under each corner of the printer
when moving it.
Caring for Your Printer
User Manual
5-53
5