Table of Contents
Advertisement
Network Control
I I I I Displays That Appear While Connected
Messages appear on the screen for a short period to indicate control switching and network connection status.
Main unit display
1. When control is switched to a computer
When the web browser is started and the specified
procedure is followed, operation switches to the computer
and "NETWORK CONTROL" appears on the main unit on-
screen display. (This appears even if on-screen display has
been set to "OFF".)
If the network control has been set to "ON
(DISPLAY: OFF)" using the digital video recorder
menu, the "NETWORK CONTROL" message will
not be displayed. (The digital video recorder will
always display live images regardless of network
operations.)
2. When control is switched to the main unit
When you click the S button at the computer, the
connection is canceled and control is switched to the main
unit, and the main unit on-screen display changes from
"NETWORK CONTROL" to "DISCONNECTED".
Once the switching is complete, any main unit button
operation will cause the "DISCONNECTED" display to
disappear.
English
3. When the connection is forcibly canceled from
the main unit
Pressing the [EXIT/OSD] button on the main unit for two
seconds or more will forcibly cancel the connection and
cause the "NETWORK CONTROL" display to disappear.
No connections will be received by the computer for 10
seconds after the connection has been forcibly canceled.
Computer display
1. When disconnected from the network
2. If the DVR is accessed while the connection is
disabled
3. When you try to access a DVR that already has
four computers connected
* The above screen display examples are those for the
DSR-3016 model.
5
Advertisement
Table of Contents
