External Clock Setting - Sanyo DSR-5709P Instruction Manual

1 INITIAL SET
7
Set the date and time.
Example: Set the summer time to begin at
25 March, 2007, 02:00.
Set the summer time to end
28 October, 2007, 02:00.
The clock display jumps forward one hour from 25 March,
2007, 01:59 to 03:00.
The clock display jumps back one hour from 28 October,
2007, 01:59 to 01:00.
(1) (2)
WEEK
ON LST-SUN
OFF LST-SUN
(5) (6)
Summer time begins
(1) Week, (2) Day of the week, (3) Month, (4) Time
Summer time ends
(5) Week, (6) Day of the week, (7) Month, (8) Time
(1) Turn the shuttle dial clockwise.
"LST" for "ON" flashes.
(2) Turn the jog dial to select the week summer time begins
and then turn the shuttle dial clockwise.
The cursor moves to "SUN" for "ON".
(3) Turn the jog dial to select the day of the week summer
time begins and then turn the shuttle dial clockwise.
The cursor moves to "03".
(4) Turn the jog dial to select the month summer time begins
and then turn the shuttle dial clockwise.
The cursor moves to "02".
(5) Turn the jog dial to select the hour summer time begins
and then turn the shuttle dial clockwise.
The cursor moves to "00".
(6) Turn the jog dial to select the minute summer time begins
and then turn the shuttle dial clockwise.
The cursor moves to the end date and time.
(7) Use the same procedure to set the date and time summer
time ends.
8
Press the [EXIT/OSD] button.
The setting is completed and the display returns to the normal
screen.
EXIT/OSD
(3) (4)
MONTH TIME
03 02:00
10 02:00
(7) (8)

External clock setting

Use the following procedure to align the time of all digital
video recorders daily when multiple recorders are connected.
(Default setting: OFF)
When time signal is input through the "CLOCK IN" terminal on
the rear panel, the internal clock of the digital video recorder is
automatically adjusted according to the time signal.
If you use this function, connect the digital video recorder
to an external device that provides accurate time signal.
If the time difference is 30 minutes or longer between the
input time from the external signal and the time set on the
digital video recorder, time adjustment does not take place.
If you do not use this function, leave the initial setting
(OFF) as is to prevent errors.
1
Connect the CLOCK OUT terminal on
the rear of the first digital video
recorder to the CLOCK IN of the second
recorder.
CLOCK OUT
C
2
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
MENU
3
Turn the jog dial to select "1.INITIAL
SET" and then turn the shuttle dial
clockwise.
The <INITIAL SET> screen is displayed.
4
Turn the jog dial to select
"1.LANGUAGE/CLOCK SET" and then
turn the shuttle dial clockwise.
The <LANGUAGE/LANGUE/SPRACHE/IDIOMA> screen is
displayed.
68
CLOCK IN CLOCK OUT
C C
To C terminal
To CLOCK IN
terminal
<LANGUAGE/LANGUE/SPRACHE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2007 MON 00:00:00
<SUMMER TIME SET>
MODE : USE
English